SR SUNTOUR North America, Inc. and the U. S. Consumer Product Safety Commission (CPSC) have announced a recall of certain SR SUNTOUR bicycle forks.
The affected bicycle forks are models
- M3010 (24” and 26”)
- M3020 (24” and 26”)
- M3030 (26”, 27.5” and 29”)
- NEX (700 c)
- XCT (20”, 26”, 27.5” and 29”)
manufactured between November 1, 2014 and January 27, 2015 with serial numbers between K*141101 and K*150127.
The fork model and fork date codes are located on the back side of the fork crown. A photograph of this area of the fork is below.
Laser marking on back of non-drive side of crown
K* YY MM DD
YY MM DD indicate the serial number and date of manufacture
K(Factory code)* (Assembly line code)
YY(Year) MM(Month) DD(day)
(Example: KB141217 was produced on Dec. 17, 2014 in Kushan Factory, B Assembly Line.)
AL P 26 TS T63
The forks were incorporated into bicycles sold under the brand names Cannondale, Diamondback, Giant, GT, Ina International, Nishiki, Novara and Schwinn, Scott and Trek. They were shipped from November 1, 2014 forward.
If you purchased a bicycle with any of the above bicycle brand names since November 2014, please check your fork to determine if it may be affected by this recall. If your bicycle fork matches one of the fork models above and has a date code within the above date code range or if you are uncertain whether your bicycle is affected, please return your bicycle to the place where it was purchased for a free inspection and repair, if needed.
Should you have any questions, please feel free to contact SR SUNTOUR at firstname.lastname@example.org or toll free number 1-888-820-8458 between 9:00 am – 6:00 pm (Central Time) or visit the SR SUNTOUR website at www.srsuntour-cycling.com.
SR SUNTOUR North America, Inc.